Wyszukaj na stronie

New antifouling

New antifouling and completing the offer.

  • HARD ANTIFOULING  is recommended to protect areas below the water line. Suitable for all kind of motorboats up to 70 knots speed. It can be also used on sailboats.
    Recommended for salt, fresh and mixed water. Due to increased hardness is resistance to damage.
    HARD ANTIFOULING Sea-Line can be applied on hulls made of laminate, steel, wooden. Don’t use on aluminium.
    Paint in colour : red, blue and black in 0,75 l or 2,5 l can.
  • NEW COLOUR ALUPLUS SELF-POLISHING. For people, who search paint with high  efficiency and for area on big fouling, we recommended self polishing antifouling ALUPLUS. In season 2018 we add to offer colors blue and black. Available packing in can 0,75l and 2,5 l. The output and efficiency of the paint is 30% higher than with traditional products. It can be applied on hulls made of aluminium.
  • THINNER FOR ANTIFOULING Thinner for antifouling it’s last product in completing the offer antifouling paint. Thinner it’s product for all antifouling paint Sea-Line. We don’t recommended thinning paint more 5%.
New antifouling

Also check

Our FAQ answers to frequently asked questions

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,
Wyjście
Przeiń na górę