NEW COLOR! Polyurethane Light Blue!

Our range of polyurethane topcoats with high resistance to UV, has been updated with a new color. Season 2014 starts with the blue premiere – RAL 5015. Sea-Line® Polyurethane Topcoats provide an aesthetic and perfect look for the boat.

Also functions as protection against water, sea air, scratches, and color change under the influence of UV radiation.

UV resistance and weathering.
High Gloss.
High mechanical strength.
The viscosity of the paint and the amount of pigment provides high performance and high opacity.
Spreading gives a perfect finish.
Easy to mix and apply.
Caution: do not drip onto vertical surfaces.
Cans include components and room for mixing them.
Special thinners matched to the type of application (brush/ roll or spray).
First layer: epoxy primer Sea-Line, two-component paints.

Also check

Sea-Line News 2024
We are expanding our offer by introducing two new products that will provide boat enthusiasts
Sea-Line News 2024
Join us at METSTRADE 2023
Come and join us at METSTRADE 2023, METSTRADE the best event for marine industry professionals,
Join us at METSTRADE 2023
Welcome to Troton
Visit us and our production plant without traveling
Welcome to Troton
New premium polishing wool
New in the 2023 season is a new polishing wool The new black and white
New premium polishing wool

Our FAQ answers to frequently asked questions

Possible causes

Incorrect proportion of base and herdener,
Too low temperature of ambient and surface (less than 10ﹾC),
Mixing two components from two different manufacturers,

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during the whole hardening process,
Use base and hardener from the same manufacturer

How to remove

The uncured mass requires complete removal from the surface.

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.