BOATSHOW 2018

Possible causes

• Too thin layer of antifouling paint,
• Choosing the wrong antifouling to type of a boat or yacht
• Thinning of antifouling paint,
• Incorrect surface preparation before antifouling application.

How to prevent

• Apply the right layer thickness of paint indicated by manufacturer,
• Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
• Do not thin antifouling because of the risk of reducing effectiveness,
• Careful surface preparations (grinding, clearing, degreasing),

How to remove

• Wet grinding, apply new layers of antifouling paint.
• Use C1 shell and fouling remover.

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Possible causes

• Wrong surface preparation,
• Skipping the primer in the system application process,
• Use of universal thinners or replacements ,
• Paint incompatibility.

How to prevent

• Correct surface preparation (grinding, clearing, degreasing),
• Use primers which improve adhesion of paints,
• Use thinners which are dedicated to each paints,
• Use of paints which are compatible to each other.

How to remove

• Grind, clean and paint again.