Wyszukaj na stronie
Menu

Antifouling thinner

It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time of drying.

CapacityCode
750 ml300008397
Antifouling thinner

Technical informations

Application method

ANTIFOULING THINNER is designed for thinning:

  • SELF-POLISHING ANTIFOULING
  • SELF-POLISHING ALU PLUS ANTIFOULING
  • HARD ANTIFOULING
  • SEAGUARD FOULING STOP

Product description "Antifouling thinner"

Using the appropriate thinner recommended by the manufacturer is not only about ensuring the correct technical parameters during application. The use of a thinner containing different chemical compounds will fundamentally change the structure of chemical bonds, thereby altering the final effect of Sea-Line® antifouling protection.

ANTIFOULING THINNER is a mixture of carefully selected solvents. The product designed for thinning Sea-Line® antifouling paints allows obtaining a product with strictly defined parameters. It ensures their proper application and drying.

ANTIFOULING THINNER can also be used to clean painting tools from residues of antifouling paints.

You have questions about the product - Antifouling thinner

    Also check

    Our FAQ answers to frequently asked questions

    Can I paint a boat, previously painted with 1 component paint, with polyurethane?

    It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

    Why despite the use of antifouing paint the bottom of the boat is overgrown?

    Possible causes

    • Too thin layer of antifouling paint,
    • Choosing the wrong antifouling to type of a boat or yacht
    • Thinning of antifouling paint,
    • Incorrect surface preparation before antifouling application.

    How to prevent

    • Apply the right layer thickness of paint indicated by manufacturer,
    • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
    • Do not thin antifouling because of the risk of reducing effectiveness,
    • Careful surface preparations (grinding, clearing, degreasing),

    How to remove

    • Wet grinding, apply new layers of antifouling paint.
    • Use C1 shell and fouling remover.

    Why does the paint have no adhesion?

    Possible causes

    • Wrong surface preparation,
    • Skipping the primer in the system application process,
    • Use of universal thinners or replacements ,
    • Paint incompatibility.

    How to prevent

    • Correct surface preparation (grinding, clearing, degreasing),
    • Use primers which improve adhesion of paints,
    • Use thinners which are dedicated to each paints,
    • Use of paints which are compatible to each other.

    How to remove

    • Grind, clean and paint again.
    Wyjście
    Przeiń na górę