Linguaggio:

STUCCO POLIESTRE : UNIVERSAL, LIGHTWEIGHT, CON FIBRA DI VETRO

Home » Prodotti » Stucchi » STUCCO POLIESTRE : UNIVERSAL, LIGHTWEIGHT, CON FIBRA DI VETRO
Szpachlówki do łodzi
STUCCO POLIESTRE : UNIVERSAL, LIGHTWEIGHT, CON FIBRA DI VETRO

DESCRIZIONE DEL PRODOTTO :


INFORMACIONI DI BASE :

Stucco poliestere :

Tipolaminazione, legno, acciaio, alluminio
Postosopra la linea di gallegg
Utilizzoriparazioni rapide sopra la linea di galleggiamento
Applicazionespatola
Durata della miscela a 20°C3 ± 5 minuti
Tempo di asciugatura a 20°C20 ± 30 minuti
Stucco poliestreColore:
universal

lightweight

con fibra di vetro

bianco

ecru

marrone

CONFEZIONE  :

UNIVERSAL :

LIGHTWEIHGT :

CON FIBRA DI VETRO :

APPLICAZIONE:

Manualmente :

INFORMAZIONI TECNICHE:

STUCCO POLIESTRE

STUCCO POLIESTRE (low styrene)

Polyester filler universal

Polyester filler lightweight

Polyester filler with fiberglass

Polyester filler universal

Polyester filler with fiberglass


Condividi:

Avete domande?
Ti risponderemo il prima possibile

Prodotti correlati

da STUCCO POLIESTRE : UNIVERSAL, LIGHTWEIGHT, CON FIBRA DI VETRO


Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę