Linguaggio:

S0 – FAST CUT & MEDIUM GLOSS

Home » Prodotti » Prodotti per lucidatura » S0 – FAST CUT & MEDIUM GLOSS
Producent farb jachtowych
S0 – FAST CUT & MEDIUM GLOSS

S0 POLISHING COMPOUND – FAST CUT & MEDIUM GLOSS

NO SILICONE


TEXTURE :

PACKAGING:

APPLICATION METHODS:

PRODUCT DESCRIPTION :

S0 polishing compound Sea-Line is a polishing paste is designed for professionals – manufacturers, shipyards and products where it forms the outer layer of the technical gelcoat or industrial topcoat with a high hardness.

S0 polishing compound removes imperfections after sanding grit sandpaper, even P800 (depending on the hardness of the surface). The paste is designed to work with with machines with a maximum rotation speed of 2000.

Best when applied with wool and hard sponges.

Surfacesgelcoat, polyurethane paints and varnishes,
Functionremoving defects from the surface

gloss restoring

Consistencypaste
Surface preparation *mechanical grindingmanual grinding
light colordark colorlight colorlight color
gelcoatP800 ⇒P1200 ⇒P1200 ⇒P1500 ⇒
polyurethane paintP1200 ⇒P1500 ⇒P1200 ⇒P1500 ⇒
hign hardness surfacesP1200 ⇒P1500 ⇒P1500 ⇒P2000 ⇒

* grinding paper minimal gradation

Method of use:

Surface preparation :

Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500

szlifowanie papierem P800Polish the surface with sandpaper of final gradation : P800 →


szlifowanie papierem P1200Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge “PROFI” :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :


Special applicators Sea-Line® :

wełna-białaLamb’s wool type MM Sea-Line

  • (Ø 80 – code : 300006437)
  • (Ø 150 – code : 300005558)
  • (Ø 180 – code : 300005557)


wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(code : 300006619)


Polishing :

Clean the surface, apply the compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture


max obrotySlowly increase the speed max. to 1800 RPM working with a little pressure


Further steps :

Clean the surface.


In order to protect the surface, it is recommended to use:

Technical information:

S0 polishing paste – instructional video (PL):



Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I use yacht paints for a drinking water tank?

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę