Linguaggio:

Agreement for Parsęta

Home » Sponsorizzazione » Agreement for Parsęta
Producent farb jachtowych

This is an informal agreement realizing ecological programme of the adoption of rivers, which was created at the initiative of Gaja Club and the company TROTON. Its signatories, apart from Troton and Gaja Club, include: schools from two communities through which Parsęta flows – Dygowo and Gościno, fishermen from Kołobrzeski Spinning Fishing Club Salmo, Zachodniopomorski Board for Melioration and Water Devices („Zachodniopomorski Zarząd Melioracji i Urządzeń”) and the Forest Division Gościno (“Nadleśnictwo Gościno”). Gościno and Dygowo community offices.

Read more: www.porozumieniedlaparsety.org.pl


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę