Linguaggio:

C2 PULITORE CONCENTRATO

Home » Prodotti » Prodotti per la pulizia » C2 PULITORE CONCENTRATO
Sea Line farby jachtowe
C2 PULITORE CONCENTRATO

DESCRIZIONE DEL PRODOTTO:

C2 PULITORE CONCENTRATO pulitore solubile e biodegradabile in acqua molto potente per la rimozione rapida ed efficiente:

Potente come un pulitore professionale adatto per parabordi, teloni, pali e componenti navali in alluminio e per la rimozione di olio idraulico.


INFORMACIONI DI BASE:

CONFEZIONE / CODICE:

CONSISTENZA :

fluido

COLORE:

rosso  (treansprente)

SOLUBILITÀ IN ACQUA:

100%

APPLICAZIONE:

Manualmente:

COME USARE:

INFORMAZIONI TECNICHE :

STEP BY STEP –CLEANING GRP (gelcoat) by using C2

HOW TO RESTORE GELCOAT ?

Our vessels may sometimes look like the one in the picture below. We can quickly and easily make it look nice. C2 Concentrate Cleaner can be used on all kinds of  gelcoats and varnishes.

C2_CONCENTRATE_CLEANER_czyszczenie_zelkotu_przed

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_ikona

STEP 1 – Prepare Sea-line C2 Concentrate Cleaner

Thin Sea-Line® C2 with water at a ratio of:
o    1:5 for heavy contaminants
o    1:10 for average contaminants

C2_CONCENTRATE_CLEANER_proporcja_mieszania

STEP 2 – Cleaning GPR

Before starting work, clean the surface from contamination, e.g. sand. Using a sponge or a brush, apply C2 Concentrate Cleaner.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu

STEP 3 – Cleaning GPR

Non-slip surface or heavily soiled elements, scrub with a soft brush.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_1

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_2

STEP 4 – Rinse

Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_plukanie

STEP 5 – Protecting GPR/varnish

To increase gloss, the surface may additionally be polished by using Sea-Line S1 or Sea-line S0 compound.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_polerowanie

The cleaned surface protect (optionally) with Sea-Line S4 Protect Wax & Sea-Line S3 Clean & Protect spray

C2_CONCENTRATE_CLEANER__czyszczenie_laminatu_woskowanie

Sea-Line® C2 CONCENTRATE CLEANER

The picture shows a cleaned surface (right side) and its condition before using C2 Concentrate Cleaner (left side).

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_porownanie


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę