Langue:

S2 EXTRA SHINE HOLOGRAM REMOVER

Accueil » Produits » Système de polissage » S2 EXTRA SHINE HOLOGRAM REMOVER
Szpachlówki do łodzi
S2 EXTRA SHINE HOLOGRAM REMOVER

S2 EXTRA SHINE HOLOGRAM REMOVER – LIQUIDE A POLIR


NO SILICONE


Sea-Line® S2 lait à polir est un agent universel de finition pour tous les types de vernis, il élimine les défauts d’après le ponçage et assure le brillant idéal de miroir. Les minéraux de polissage de qualité élevée assurent l’éclat impeccable de miroir sans hologrammes et la proportion idéale de contenu des corps solides et du liant permet de maintenir la propreté dans le lieu de travail et fait que les résidus du produit sont faciles à supprimer.

Ne contient pas de silicone.

Type de surfacegelcoat, produits en composites, vernis de revêtement.
Fonctionpolissage, création de l’éclat, protection, recommandé à la finition sur les couleurs foncées
Suppression des défautsRayures sur les couleurs foncées
ApplicationManuelle ou
A la machine
Applicateur recommandéLaine d’agneau, éponges dures et molles
Emballage0,500kg
codes : 300005581
Couleurvert clair

Polissage avec Sea-Line® – vidéo d’instruction




Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę