Langue:

Diluant – de revêtement par projection

Accueil » Produits » Additives » Diluant – de revêtement par projection
Naprawa łodzi
Diluant – de revêtement par projection

Le dilutif pour les produits polyuréthane est un mélange de dilutifs organiques choisis. Produit adapté à diluer les produits polyuréthane – peinture couleur et vernis incolore. En effet, il permet d’obtenir un produit aux paramètres strictement définis. Les proportions détaillées d’utilisations sont données sur les fiches techniques des produits. Il ne faut pas dépasser les doses recommandées de dilutif.


Emballage :1 l
Codes : 5747
COLOREURRAL
Blanc____50–55%
Crémeux101550–55%
Rouge300345-50%
Bleu marine500345-50%
Bleu501545-50%
Vert602945-50%
Gris700045-50%
Noir900545-50%
Vernis polyuréthane incolore – éclat function primairex15-20 %
Vernis polyuréthane incolore – éclatx0-20 %

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę