Langue:

Alliance pour la rivière Parsęta

Accueil » Coopération et le parrainage » Alliance pour la rivière Parsęta
Farby dla jachtów

est une alliance informelle réalisant un programme écologique d’adoption des rivières, créée par le Club Gaja et la Société TROTON SARL. L’accord est signé aussi par : les écoles des deux communes où passe Parsęta – Dygowo et Gościno, les Pêcheurs du Club de la Pêche en Spinning Salmo de Kołobrzeg, Zachodniopomorski Zarząd Melioracji i Urządzeń Wodnych (Direction des Méliorations et des Installations des eaux de la voïvodie Zachodniopomorskie) et le Canton forestier de Gościno, les Mairies des communes Gościno et Dygowo.

Savoir en plus: www.porozumieniedlaparsety.org.pl


Partager:

Voir aussi
Autres threads de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę