Langue:

Vernis polyuréthane incolore – éclat

Accueil » Produits » Vernis de revêtement » Vernis polyuréthane incolore – éclat
Naprawa łodzi
Vernis polyuréthane incolore – éclat


Type de bateaul’bois,
GRP laminates,
EndroitAu dessus de la ligne de flottaison
(en option – au dessous de la ligne de flottaison)
Function– Top coat
– Primaire
ApplicationPinceau, rouleau, projection
DilutionOui,
Dilutif à l’application des vernis de revêtement:
– par projection
– avec pinceau
/rouleau
Rendement théorétique pour 1l12÷13 m2 pour 80 μm WFT /39 μm DFT
Nombre de couches2 – 4
Temps de travail  20°C3 h
Temps entre les couches Sans la nécessité de ponçagemin 20 m.
Couleurincolore
Emballage0,750 l15 l
Codes:67497506

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę