Langue:

Mastic polyester de moulage

Accueil » Produits » Mastics » Mastic polyester de moulage
Farby antyporostowe
Mastic polyester de moulage


Type de bateauGRP laminates, l’bois, l’acier, l’aluminium
EndroitAu-dessus de la ligne de flottaison
FunctionGrandes surfaces
ApplicationCouteau à mastic
Rendement théorétique pour 1kg2m2 (200qm)
Temps de travail 20°C8÷10 min
Durée de durcissement  20°C30÷40 min
Couleurjuane
Emballagecodes
2 kg –
5 kg –
25 kg –		4952
4600
4601

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę