Langue:

C2 CONCENTRÉ DE NETTOYAGE

Accueil » Produits » Produits cosmétiques » C2 CONCENTRÉ DE NETTOYAGE
Naprawa łodzi
C2 CONCENTRÉ DE NETTOYAGE

Produit intense, biodégradable, soluble dans l’eau, conçu pour un nettoyage facile et efficace de salissures sur les surfaces vernies, gelcoats, laminés, aluminium, PVC et textiles.

Mode d’emploi

Diluer le produit avec de l’eau suivant un rapport de 1:10 pour des salissures moyennes et de 1:5 pour de fortes salissures.
Utiliser un chiffon ou une brosse délicate pour nettoyer.
Rincer abondamment à l’eau.


Emballage :

STEP BY STEP –CLEANING GRP (gelcoat) by using C2

HOW TO RESTORE GELCOAT ?

Our vessels may sometimes look like the one in the picture below. We can quickly and easily make it look nice. C2 Concentrate Cleaner can be used on all kinds of  gelcoats and varnishes.

C2_CONCENTRATE_CLEANER_czyszczenie_zelkotu_przed

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_ikona

STEP 1 – Prepare Sea-line C2 Concentrate Cleaner

Thin Sea-Line® C2 with water at a ratio of:
o    1:5 for heavy contaminants
o    1:10 for average contaminants

C2_CONCENTRATE_CLEANER_proporcja_mieszania

STEP 2 – Cleaning GPR

Before starting work, clean the surface from contamination, e.g. sand. Using a sponge or a brush, apply C2 Concentrate Cleaner.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu

STEP 3 – Cleaning GPR

Non-slip surface or heavily soiled elements, scrub with a soft brush.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_1

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_2

STEP 4 – Rinse

Removed contaminants and the product residues, rinse abundantly with water. Do not let contaminants dry out on the cleaned surface.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_plukanie

STEP 5 – Protecting GPR/varnish

To increase gloss, the surface may additionally be polished by using Sea-Line S1 or Sea-line S0 compound.

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_polerowanie

The cleaned surface protect (optionally) with Sea-Line S4 Protect Wax & Sea-Line S3 Clean & Protect spray

C2_CONCENTRATE_CLEANER__czyszczenie_laminatu_woskowanie

Sea-Line® C2 CONCENTRATE CLEANER

The picture shows a cleaned surface (right side) and its condition before using C2 Concentrate Cleaner (left side).

C2_CONCENTRATE_CLEANER_czyszczenie_laminatu_porownanie

 


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę