Cut level = 10
Gloss level = 6
NO SILICONE
S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)
S07 Heavy Cut Sea-Line is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
S07 Heavy Cut Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P800 or higher. The best results on industrial gelcoat we obtain when we finish grinding with sandpaper P1200 or higher.
Using S07 compound allows for shortening the labour time thanks to a high cutting force and gloss in final stage of work.
TEXTURE :
PACKAGING:
APPLICATION METHODS:
| Surfaces | tool gelcoat (technical), gelcoat, | |||
| Function | removing defects from the surface gloss restoring | |||
| Consistency | paste | |||
| Surface preparation * | mechanical grinding | manual grinding | ||
| light color | dark color | light color | dark color | |
| gelcoat | P800⇒ | P1200⇒ | P800⇒ | P1200⇒ |
| tool gelcoat (technical) | P1200⇒ | P1500⇒ | P2000⇒ | |
| high hardness surfaces | P1200⇒ | P1500⇒ | P2000⇒ | |
Surface preparation :
Clean surface destined for polishing.
Polish surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
Double-sided wool Sea-Line:
(code : 300006614)
One side wool Sea-line :
(code: 300006613)
Polishing sponge «PROFI» :
(code :300005933)
Polishing sponge whit velcro :
(white – code : 300000384)
Polishing wool BALL (80mm) Sea-Line :
(Kod : 300006619)
Clean surface, apply compound onto an element or head (wool or tough sponge)
Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture
Slowly increase speed max. to 1800 RPM working with a little pressure
Further steps :
Clean surface. If after using S07 left any defects:
Fuerza de corte = 6 Nivel de brillo = 8 NO SILICONE LA TEXTURA : Pasta EMBALAJE: 500 g / Código : 300005578 […]
S4 – cera protectora Sea-Line S4 es un producto que proporciona un brillo excelente y una capa protektora de larga […]
S2 EXTRA SHINE HOLOGRAM REMOVER – COMPUESTO DE PULIDO Fuerza de corte = 2 Nivel de brillo = 10 NO SILICONE LA […]
S0 – PASTA DE PULIR – FAST CUT & MEDIUM GLOSS Fuerza de corte = 8 NO SILICONE Nivel de brillo = […]
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
Para rellenar cavidades y hacer frente a las desigualdades causadas por daños o durante el curso de la producción
Barcos de superficie de impacto de las actividades de ósmosis y la corrosión destructiva en ambientes hostiles
Protección contra el agua y contra los efectos negativos de los rayos UV
Proteger la parte inferior de la embarcación antes de las incrustaciones de algas y conchas. Protección contra el agua
Eliminación efectiva de arañazos, color refrescante y gelcoat brillo o pintura
Preparaciones especializados para la limpieza y restauración efectiva
Laminación, encolado y relleno de fisuras en gelcoat
Una serie de productos útiles durante el constructor de barcos de trabajo
