Lengua:

Disolvante para aplicaciones para pistola

Página web » Productos » Extras » Disolvante para aplicaciones para pistola
Naprawa łodzi
Disolvante para aplicaciones para pistola

Disolvante para aplicaciones para pistola pinturas y barnices superficiales

Disolvante los trabajos es muy importante utilizar el disolvante adecuado lo que proporciona los parámetros apropiados de la pintura – NIVELACIÓN, tiempo de trabajo, la velocidad de secado.

DISOLVANTE PARA aplicaciones a pistola pinturas y barnices superficiales  de poliuretano de color y transparentes:


Embalaje :1 l
Código :5747
Aplicación :pistolo
RAL – color
COLORRALdisolvante
Blanco

Crudo

____

1015

50–55%
rojo

Azul marino

Azul

Verde

Gris

Negro

3003

5003

5015

6029

7000

9005

45-50%
Barniz – Imprimaciónx15-20 %
Barniz – Top coatx0-20 %

Información técnica:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible
 
Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę