Lengua:

Styrene free and styrene reduced products

Página web » Noticias y promociones » Styrene free and styrene reduced products
Naprawa łodzi
Styrene free and styrene reduced products

Considering new regulations in several European countries we would like to adjust our products to current expectations.

We are ready to offer you low styrene and styrene free products:

– filler universal styrene free

– filler with fiberglass styrene free

– filler lightweight styrene free

– gelcoat filler styrene free

– filler universal styrene redced

– filler with fiberglass styrene reduced

Basic technical data here.

Please contact us in case of any questions

tel. (+48) 94 35 316 20;
SKYPE: sea-line.eu

EMAIL: info@sea-line.eu


Compartir:

Ver también
Otros hilos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę