Lengua:

Polymer

Página web » Productos » Extras » Polymer
Kosmetyki do naprawy łodzi oraz jachtów
Polymer

Is elastic sealant recommended for sealing and bonding various types of materials.

PRODUCT DISCRIPTION:

MS POLYMER is recomended for use on :




Characteristic features of POLYMER

BASIC INFORMATION:

POLYMER

Type laminat, steel, wood, concret, plexi, etc.
PlaceAbove and below waterline
Functionsealing

bonding

Chemical characterhybrid
Densinity1,44 g/cm³
Curing mechanizmapsorption of moisture from air
Elogation at breakto 500% (DIN 53 504)
Tensile strenght3,0 N/mm² (DIN 53 504)
Tear resistance20 N/mm
Resistant to temperatures-40ºC to + 90ºC
Resistant to temperatures for short intervalsto +120ºC (white, black)
to +100ºC (transparent)
Time for skin formation 20ºC15 minut
Curing time 20ºC24 h (weld to 3 mm)
Time to contact with water 20ºCmin. 30 minutes
Time to be painted 20ºC3 day
Shrinkno

COLOR / PACKAGING / CODE

WHITE 200 ml  /  code : 8208

BLACK 200 ml  /  code : 8210

TRANSPARENT 200 ml  /  code : 8211

SURFACE PREPARATION:

Apply on surfaces no need to priming.

Steel surfaces is recommend to prime using Epoxy Anticorrosion primer 4:1 Sea-Line.

Wood and concrete is recommend to prime using Epoxy Woodprimer 10:4 Sea-Line.
In case of application on natural wood, its humidity should be lower than 20%.

Clean surfaces from rust, damage paint coatings, etc. To increase adhesion, is recommend to sand surfaces by sand paper :

Clean surfaces from dust and contamination.

Grease and salt remove using Cleaner Sea-Line®

APPLICATION:

Thanks to advance dispensing system, POLYMER does not require extra tools to application,  provides exact thickness of weld during application.


MS POLYMER 1

unlock nozzle


MS POLYMER 2

unlock dosing regulator


MS POLYMER 3

set dosing regulator accordance with the needs


MS POLYMER 4

apply product by pressing lever


MS POLYMER 5

after finishing  application, secure dosing nozzle and block dosing regulator


Technical information:


Compartir:

¿Tienes alguna pregunta?
Le responderemos lo antes posible

Productos relacionados

de Polymer


Ver también
Otros productos de esta categoría

Nuestras FAQ
Respuestas a las preguntas más frecuentes

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I use yacht paints for a drinking water tank?

Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.

Nuestra oferta
Consulte nuestra oferta de materiales y pinturas para la construcción de embarcaciones
Exit
Przewiń na górę