To obtain a fully-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to glass mat for polyester or a 1:1 weight ratio of resin to glass fabric.To finish laminated surfaces we recommend using Sea-Line® fillers, Sea-Line® epoxy primers, Sea-Line® topcoats or a Sea-Line® gelcoat repair kit.
Type | Laminates, steel | |
Place | Above and below waterline | |
Function | Laminating, repairs, reinforcement, gluing | |
Application | Brush, roll | |
Thinning | Not recommended | |
Theoretical coverage for 1kg (for 1 layer laminate) | performance for layer of laminate based on glass fibre mats | |
150 g/m² 300 g/m² 450 g/m² | ~3,5 m² ~1,7 m² ~1,1 m² | |
performance for layer of laminate based on glass fibre | ||
200 g/m² 400 g/m² | ~5 m² ~2,5 m² | |
Coats number | According to your needs | |
Pot life 20°C | 10~15 min | |
Hardening time | 45 min | |
Color | transparent | |
Pack | code | |
250 g 500 g 1 kg | 2392 6080 2480 |
Set of 250 g
contains a polyester structural resin with hardener, fibre glass mat (0,25m2), disposable gloves, a brush and a cup with a scale for easy dosing of ingredients and instructions for repair.
Set of 500 g
contains a polyester structural resin with hardener and a cup with a scale for easy dosing of ingredients and instructions for repair.
Set of 1 kg
contains a polyester structural resin with hardener and a cup with a scale for easy dosing of ingredients and instructions for repair.
PRODUCT DISCRIPTION : NEW Gelcoat Filler is very fast hard and easy in use. Hardener is a paste Recommended for […]
GLASS FIBRE MATE Glass fibre mat, in connection with laminating resin, is used for the repairs of big holes in […]
Sea-Line® COLOR RENOVATION COLOR RENOVATION is a product which does not contain silicon and efficiently brings back an original appearance […]
Gelcoat based on IZO/NPG resin, thanks to which it achieves good resistance to weather conditions and high mechanical properties. Primarily […]
Sea-Line yacht paints are designed for painting the surface of boats and yachts made of various materials, e.g. laminate, wood or steel. We do not have a certificate of the National Institute of Hygiene, which would allow the use of yacht paint to paint the tank with drinking water.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work