Type | GRP laminates, wood, steel, aluminum |
Place | Above waterline |
Function | Fast repairs |
Application | Putty knife |
Pot life – 20°C | 3-5 min |
Hardening time 20°C | 20 ± 30 min |
Color: | |
Universal with fiberglass | White Light green |
POLYESTER FILLER LOW STYRENE
UNIVERSAL :
FIBREGLASS :
Manually:
universal
with fiberglass
CORK SANDING BLOCK FOAM SANDING BLOCK PLASTIC SANDING BLOCK PROTECTIVE FOIL PAPER TOWEL (ROLL) ANTISTATIC RAGS CORK SANDING BLOCK Sanding […]
MASKING TAPE MASKING TAPE – MASTER “AQUA” SILVER TAPE – UNIVERSAL MASKING TAPE High-quality masking tape characterized by very good adhesion […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of […]
Is elastic sealant recommended for sealing and bonding various types of materials. PRODUCT DESCRIPTION: POLYMER is recomended for use on […]
Epoxy Filler Universal “NEW” 2:1 PRODUCT DISCRIPTION : Small repair caused by the action of osmosis. Healed minor damage, small […]
PRODUCT DISCRIPTION : NEW Gelcoat Filler is very fast hard and easy in use. Hardener is a paste Recommended for […]
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work