Language:

Polyester filler low styrene universal and with fiberglass

Home » Products » Fillers » Polyester filler low styrene universal and with fiberglass
Naprawa łodzi
Polyester filler low styrene universal and with fiberglass
TypeGRP laminates, wood, steel, aluminum
PlaceAbove waterline
FunctionFast repairs
ApplicationPutty knife
Pot life – 20°C3-5 min
Hardening time 20°C20 ± 30 min
Color:
Universal
with fiberglass
White
Light green

PACKAGING :

POLYESTER FILLER LOW STYRENE

UNIVERSAL :

FIBREGLASS :

APLICATION:

Manually:

POLYESTER FILLER (low styrene)

universal

with fiberglass


Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę