Language:

Epoxy filler lightweight (NEW)

Home » Products » Fillers » Epoxy filler lightweight (NEW)
Sea-Line
Epoxy filler lightweight (NEW)

Epoxy filler lightweight 1:1 NEW

recommended for large areas due to low own weight

PRODUCT DESCRIPTION :


Typelaminate, wood, stell, aluminium
Placeabove and below waterline
Functionlarge areas
Weight1l = 700 g
Aplicationputty knife
Koloroff white
Packagecode
0,750 l

7,5 l

12202

12288


Share:

Do you have any questions?
We will respond as soon as possible

Related products

from Epoxy filler lightweight (NEW)


See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę