Cut level = 9
Gloss level = 8
NO SILICONE
TEXTURE :
PACKAGING:
APPLICATION METHODS:
Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.
Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.
Przygotowanie powierzchni :
Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500
Polish the surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
Double-sided wool Sea-Line:
(code : 300006614)
One side wool Sea-line :
(code: 300006613)
Polishing sponge “PROFI” :
(code :300005933)
Polishing sponge whit velcro :
Polishing wool BALL (80mm) Sea-Line :
(Kod : 300006619)
Clean the surface, apply the compound onto an element or head (wool or tough sponge)
Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture
Slowly increase the speed max. to 1800 RPM working with a little pressure
Clean the surface. In order to protect the surface, it is recommended to use:
S2 EXTRA SHINE HOLOGRAM REMOVER FINISHING COMPOUND CUT LEVEL = 2 GLOSS LEVEL = 10 NO SILICONE Sea-Line® S2 finishing […]
S3 FINISH CLEANER – SHINE CONTROL is a product for all types of paints,varnishes – including HS, 2K, nitro, synthetic […]
S1 SOFT CUT & GLOSS – Polishing paste thanks to its versatility can be used in industrial as well as […]
S4 PROTECT WAX Perfect gloss with lasting effect and protective cover. Reduces the adhesion of dirt. Suitable for gelcoat and […]
We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work
