It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time of drying.
Epoxy Lightprimer 5:1 | Brush / Roll | 5-25% |
Spray gun | 5-50% | |
Epoxy Antyosmotic HS 3:2 | Brush / Roll | 0-5% |
Spray gun | Not recommended | |
Epoxy Anticorrosiv 4:1 | Brush / Roll | 5-25% |
Spray gun | 5-50% | |
Epoxy Woodprimer 10:4 | Brush / Roll | 0-5% |
Spray gun | 20-30% |
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
2-component epoxy anti-corrosive primer. Recommended for priming steel and aluminum. Excellent substrate protection against corrosion. Provides very good adhesion. Good […]
MASKING TAPE MASKING TAPE – MASTER “AQUA” SILVER TAPE – UNIVERSAL MASKING TAPE High-quality masking tape characterized by very good adhesion […]
Spray thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of spray polyurethane topcoats — […]
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work