Language:

BRUSH ROLL THINNER FOR POLYURETHAN

Home » Products » Complementary products » BRUSH ROLL THINNER FOR POLYURETHAN
Farby szkutnicze
BRUSH ROLL THINNER FOR POLYURETHAN

Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat.

Thinner for the application of brush and roll polyurethane topcoats — colored and colorless.
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, potlife, time of drying.


Package :250 ml1 l
Code:71155746
Application :Brush / Roll
Color :RAL
White____20–25%
Light ivory101520–25%
Ruby red300315-20%
Sapphire blue500315-20%
Sky blu501515-20%
Mint green602915–20%
Squirrel grey700015–20%
Jet black900515–20%
High Gloss PRIMER functionx15-20 %
High Gloss TOPCOAT functionx0-5 %

Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę