Type | GRP laminates, steel, aluminium |
Place | Above and below waterline |
Function | Filling Antiosmotic |
Application | brush, roll, spray gun |
Thinning | Not recommended 0 – 5 % |
Theoretical coverage For 1l | 6-7 m2 for 150 μm WFT/ 150 μm DFT |
Number of coats | 1 – 4 |
Pot life 20°C | 0,45 h |
Time between layers without sanding | 8 h – 72 h |
Color | Dark grey |
Pack | code: |
0,750l – 7,5l – | 5075 5149 |
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
BRUSH PROFESSIONAL Sea-Line® BRUSH Sea-Line® ROLL AND HOLDER ROLL Sea-Line® PAINT TRAY Sea-Line® MIXER FOR PAINT Sea-Line® STORAGE – PLASTIC […]
MASKING TAPE MASKING TAPE – MASTER “AQUA” SILVER TAPE – UNIVERSAL MASKING TAPE High-quality masking tape characterized by very good adhesion […]
CORK SANDING BLOCK FOAM SANDING BLOCK PLASTIC SANDING BLOCK PROTECTIVE FOIL PAPER TOWEL (ROLL) ANTISTATIC RAGS CORK SANDING BLOCK Sanding […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
CORK SANDING BLOCK FOAM SANDING BLOCK PLASTIC SANDING BLOCK PROTECTIVE FOIL PAPER TOWEL (ROLL) ANTISTATIC RAGS CORK SANDING BLOCK Sanding […]
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
2-component epoxy anti-corrosive primer. Recommended for priming steel and aluminum. Excellent substrate protection against corrosion. Provides very good adhesion. Good […]
We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work