Epoxy Primer 4:1 Anticorrosion

Home » Products » Primers » Epoxy Primer 4:1 Anticorrosion
Epoxy Primer 4:1 Anticorrosion

TypeSteel, aluminium
PlaceAbove and below waterline
Filling coat
Applicationbrush, roll, spray gun
ThinningYes – thinner for epoxy system
Theoretical coverage For 1l11-12 m2 for
85 μm WFT/ 60 μm DFT
Number of coats2 – 3
Pot life -20°C2 h
ColorOxygen red
Time between layers without sanding4 h – 5 days
0,750l –
7,5 l –


Do you have any questions?
We will respond as soon as possible
See also
Other products in this category

Answers to frequently asked questions

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Can I add more hardener to speed up the reaction?

Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Przewiń na górę