O1 TEAK OIL is a protective oil for wood based on solvent dispersion of alkyd resin
O1 TEAK OIL
| Type | teakwood, mahogany, ipe wood, movingui wood, etc. |
| Function | impregnate surface |
| Thinning | non recomended |
| Theoretical coverage For 1l | 11 ~12 m2 |
| Number of coast | depend on needs |
| Pot life 20°C | ok. 30 min |
| Time between the layers | 30 min do not allow to dry layer |
| Dry to the touch 20°C | 5 h |
| Hardening time 20°C | 3 day |
AMBER (transparent)
Manually:
Brush and roll thinner for polyurethane color and high gloss polyurethane clear coat. Thinner for the application of brush and […]
Polyurethane topcoat yacht paint especially recommended above the waterline. UV resistance and weathering. High Gloss. High mechanical strength. The viscosity […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Non skid powder is anadditive for polyurethane topcoats. Non-slip powder = 20 grams, the amount for 750 ml of polyurethane […]
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work
