NEW COLOR! Polyurethane Light Blue!

Our range of polyurethane topcoats with high resistance to UV, has been updated with a new color.

Season 2014 starts with the blue premiere – RAL 5015.

Sea-Line® Polyurethane Topcoats provide an aesthetic and perfect look for the boat.

Also functions as protection against water, sea air, scratches, and color change under the influence of UV radiation.

UV resistance and weathering.
High Gloss.
High mechanical strength.
The viscosity of the paint and the amount of pigment provides high performance and high opacity.
Spreading gives a perfect finish.
Easy to mix and apply.
Caution: do not drip onto vertical surfaces.
Cans include components and room for mixing them.
Special thinners matched to the type of application (brush/ roll or spray).
First layer: epoxy primer Sea-Line, two-component paints.

Our FAQ

Answers to frequently asked questions

It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Possible causes

Too low temperature of ambitne,
Incorrect proportion of base and herdener,
Mixing two components from two different manufacturers

How to prevent

Apply the correct proportions of components
Maintain steady temperature (around 20ﹾC) during whole hardening process,
Mix the products thoroughly and bleed the mixture.

How to remove

The uncured mass requires complete removal from the surface.

Our offer

Familiarize yourself with our offer of boatbuilding materials and paints

Fillers
Smooth surface
Refilling and to tackle inequalities caused by damage to or during the course of production
Fillers
Primers
Safeguard
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Primers
Topcoats
Aesthetics and beauty
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Topcoats
Antifouling
Bottom protection
Protect the hull from fouling with algae and shells
Antifouling
Polishing
Color and gloss
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Polishing
Cosmetics
Care and protection
Special preparations for effective cleaning and refinishing
Cosmetics
Resins and repair kits
Repairs and laminating
Laminating, gluing and filling in cracks in gelcoat
Resins and repair kits
Adds
Adds
Range of products useful in the boat builder work
Adds