Language:

Epoxy repair kit NEW

Home » Products » Resins and repair kit » Epoxy repair kit NEW
Farby szkutnicze
Epoxy repair kit NEW

Sea-Line® structural epoxy is a comprehensive application:

To obtain a full-fledged and adequately strong laminate, use a 2:1 weight ratio of resin to fibre glass mat for epoxy or a 1:1 weight ratio of resin to glass fabric.

To finish laminated surfaces we recommend using Sea-Line® epoxy fillers, Sea-Line® epoxy primers and Sea-Line® topcoats.


TypeLaminates, wood, steel, aluminium
PlaceAbove and below waterline
FunctionLaminating, repairs, reinforcement, gluing
AplplicationBrush, roll
Coats numberDepend on needs
Pot life 23°C45 min
Hardening time7 h
ColorClear
Pack250 g
Code3636

The resin is available in three sets:


Share:

Do you have any questions?
We will respond as soon as possible
 
See also
Other products in this category

Our FAQ
Answers to frequently asked questions

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Contamination in topcoat paint?

Possible causes

  • Inaccurate surface cleaning before paint application,
  • Incorrect painting tools preparation (brush and roll),
  • Performing work in a place exposed to constant contact with dust.

How to prevent

  • Careful surface preparation (grinding, clearing, degreasing),
  • Careful painting tools preparation before use,
  • Maintain clean work environment

How to remove

  • Grind, clean and paint again.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę