PRODUCT DISCRIPTION:
Surfaces | GRP, laminates, steel, aluminum | |
Area | Above and below waterline | |
Function | Grounding Intercoating Filling Antiosmotic Anticorosive | |
Application | spray can | |
Theoretical coverage for 400 ml | 1-2 м2 | |
Number of coats | 2 – 4 | |
Pot life 20°C | 48 h | |
Time between layers without sanding | 5~10 minutes | |
Color (matt) | white | |
Pack | 400 ml | |
Code | 38758 |
Before triggering, shake can thoroughly for 2 minutes after agitation balls are heard.
Turn the can upside down and place on a firm surface.
Press the red pushbutton all the way in with the palm of your hand.
Set the adjustable spray nozzle to the size of the damage and damage pattern.
Standard application: approx. 2÷4 spray coats, recommended dry film layer: 80 ~200 μm
NOTICE: For antiosmosis and anticorrosion protection recommended DTF is 240 μm.
After painting, turn the can upside down and spray the valve until empty.
MASKING TAPE MASKING TAPE – MASTER “AQUA” SILVER TAPE – UNIVERSAL MASKING TAPE High-quality masking tape characterized by very good adhesion […]
DUST MASK DISPOSABLE NITRILE GLOVES “MASTER” DISPOSABLE NITRILE GLOVES WORKWEAR – SINGLE USE POLYESTER WORKWEAR (blue) reusable overall PASTE HAND […]
2-component epoxy anti-corrosive primer. Recommended for priming steel and aluminum. Excellent substrate protection against corrosion. Provides very good adhesion. Good […]
Thinner for all Sea-Line epoxy primers. It is very important to use paint thinners, which provide the appropriate parameters of […]
Epoxy Lightprimer 5:1 High-quality 2-component thin coat epoxy primer. Great primer for paints and topcoats. Provides a transition layer between […]
CORK SANDING BLOCK FOAM SANDING BLOCK PLASTIC SANDING BLOCK PROTECTIVE FOIL PAPER TOWEL (ROLL) ANTISTATIC RAGS CORK SANDING BLOCK Sanding […]
It is not recommended to apply 2K paints over 1K paints. 1K and 2K inks differ in their composition and properties, including hardness, chemical resistance and durability. 1K paints are one-component and dry by evaporating the solvent, while 2K paints are two-component and need to be cured by adding a hardener. Applying 2K paint over 1K paint can cause unpredictable chemical reactions and lead to undesirable effects such as dulling, chipping or flaking of the paint. Therefore, always use paints according to the manufacturer’s instructions and do not mix different types of paints. farby zgodnie z instrukcjami producenta i nie mieszać różnych rodzajów farb.
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work