Antifouling ALU PLUS

Home » Products » Antifouling paints » Antifouling ALU PLUS
Farby szkutnicze
Antifouling ALU PLUS

Use biocides safely. Always read the label and product information before use.

Typealuminum, GRP laminates, wood, steel
PlaceBelow waterline
FunctionAntifouling paint discourages the growth
of barnacles, weed, and
Applicationbrush, roll, spray gun other water life
on the submersed hull of the boat.
Thinning**No recomended
Theoretical coverage For 1l11 m2 for
90 μmWFT/ 50 μm DFT
Coats number1 – 3
Pot life 20°CMin 5 h – max 7 days
Time between layers without sandingMin 12 h – max 6 months
Pack0,750 l2,5 l

navy / blue









In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.


Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.



Do you have any questions?
We will respond as soon as possible
See also
Other products in this category

Answers to frequently asked questions

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Can I degrease surfaces with acetone?

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Przewiń na górę