Language:

New antifouling

Home » News and promotions » New antifouling
Farby dla jachtów
New antifouling

New antifouling and completing the offer

HARD ANTIFOULING  is recommended to protect areas below the water line. Suitable for all kind of motorboats up to 70 knots speed. It can be also used on sailboats.
Recommended for salt, fresh and mixed water. Due to increased hardness is resistance to damage.
HARD ANTIFOULING Sea-Line can be applied on hulls made of laminate, steel, wooden. Don’t use on aluminium.
Paint in colour : red, blue and black in 0,75 l or 2,5 l can.

NEW COLOUR ALUPLUS SELF-POLISHING. For people, who search paint with high  efficiency and for area on big fouling, we recommended self polishing antifouling ALUPLUS. In season 2018 we add to offer colors blue and black. Available packing in can 0,75l and 2,5 l. The output and efficiency of the paint is 30% higher than with traditional products. It can be applied on hulls made of aluminium.

THINNER FOR ANTIFOULING Thinner for antifouling it’s last product in completing the offer antifouling paint. Thinner it’s product for all antifouling paint Sea-Line. We don’t recommended thinning paint more 5%.

nowe kolory antofouling


Share:

See also
Other threads in this category

Our FAQ
Answers to frequently asked questions

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.
Our offer
Familiarize yourself with our offer of boatbuilding materials and paints
Exit
Przewiń na górę