12 mm is the perfect tool for the application of epoxy primers and antifoulings. It is available in widths of 30, 50 and 70 mm. The brush may also be used for application of topcoats, polyurethane varnishes and enamels. A mixture of natural bristle hair fibers with PET (50/50%), is a combination of a suitable material absorbency and easy application appropriate thickness of the layers of paint. The construction of galvanized caps combined with hardiness- solvent-adhesive prevents hair loss.
size 30 mm | 300006820 |
size 50 mm | 300006821 |
size 70 mm | 300006822 |
paint tray | 300006829 |
Woodenspatula for easy mixing paint one and two component paints.
mixing stik | 300006854 |
Disposable paper strainer with nylon mesh purposed for filtering mechanical impurities from paints and lacquers.
Disposable paper strainer: 115 qm | 300001983 |
Disposable paper strainer: 190 qm | 300000493 |
HARD ANTIFOULING paint: Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed […]
Cleaner – recommended to degrease the surface before painting. Silicone remover is the product used for surface cleaning before lacquering. […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Gelcoat additive – paraffin Paraffin is an additive mainly to polyester gelcoats, necessary when it is necessary to apply the […]
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).
We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.
Refilling and to tackle inequalities caused by damage to or during the course of production
Protects boat surfaces from the effects of destructive activities osmosis and corrosion
Provide an aesthetic and a perfect look of the boat also protective against water and UV radiation
Protect the hull from fouling with algae and shells
Effectively remove scratches, refresh the color of gelcoat or paint, fast shine effect
Special preparations for effective cleaning and refinishing
Laminating, gluing and filling in cracks in gelcoat
Range of products useful in the boat builder work