Γλώσσα:

S07 HEAVY CUT – στίλβωση πάστα

Ιστοσελίδα » Προϊόντα » Σύστημα στίλβωσης » S07 HEAVY CUT – στίλβωση πάστα
Kosmetyki do naprawy łodzi oraz jachtów
S07 HEAVY CUT – στίλβωση πάστα

So7 POLISHING COMPOUND – HEAVY CUT

NO SILICONE


PRODUCT DESCRIPTION :

S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)

S07 Heavy Cut Sea-Line is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.

S07 Heavy Cut Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P800 or higher. The best results on industrial gelcoat we obtain when we finish grinding with sandpaper P1200 or higher.

Using S07 compound allows for shortening the labour time thanks to a high cutting force and gloss in final stage of work.

TEXTURE :

PACKAGING:

APPLICATION METHODS:

Surfacestool gelcoat (technical), gelcoat,
Function

removing defects from the surface

gloss restoring

Consistencypaste
Surface preparation *mechanical grindingmanual grinding
light colordark colorlight colordark color
gelcoatP800⇒P1200⇒P800⇒P1200⇒
tool gelcoat (technical)P1200⇒P1500⇒P2000⇒
high hardness surfacesP1200⇒P1500⇒P2000⇒

Method of use:

Surface preparation :

Clean surface destined for polishing.

szlifowanie papierem P800Polish surface with sandpaper of final gradation : P800 →


szlifowanie papierem P1200Dark colours or hard surfaces polish with sandpaper of final gradation : P1200 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge “PROFI” :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :

(white – code : 300000384)


Special applicators Sea-Line® :

wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean surface, apply compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture


max obrotySlowly increase speed max. to 1800 RPM working with a little pressure


Further steps :

Clean surface. If after using S07 left any defects:


In order to protect surface, it is recommended to use:

Technical information:


Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό
 
Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę