Γλώσσα:

PAINT AND VARNISH – POLISHING INSTRUCTION

Ιστοσελίδα » Polishing instructions » PAINT AND VARNISH – POLISHING INSTRUCTION
Szpachlówki do łodzi
PAINT AND VARNISH – POLISHING INSTRUCTION

PAINT AND VARNISH – POLISHING INSTRUCTION

USE:

SURFACE:

EFECT:

PAINT AND VARNISH – POLISHING INSTRUCTION

polishing instruction

OTHERS POLISHING INSTRUCTION:
Practical advice:

Μετοχή:

Δείτε επίσης
Άλλα νήματα σε αυτήν την κατηγορία

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Can I use universal thinner?

We do not recommend using universal thinners. The use of a thinner with an unknown composition may result in loss of adhesion, lack of proper flow of paint and varnish defects.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę