Γλώσσα:

Epoxy Lightprimer 5:1

Sea Line farby jachtowe
Epoxy Lightprimer 5:1


τύποςΕλάσματα GRP, ξύλο
θέσηΠάνω και κάτω από την ίσαλο γραμμή
ΛειτουργίαΧρώμα Βάσης
Ενδιάμεση στρώση
Στρώση γεμίσματος
Αντιοσμωτική
Εφαρμογήπινέλο, ρολό, πιστόλι βαφής
ΔιαλυτικόΝαι-Διαλυτικό για εποξειδικό σύστημα
Θεωρητική καλυπτική ικανότητα για 1 l11-10 m2 για 90 μm WFT/ 60 μm DFT
Αριθμός στρώσεων1 – 5
Χρόνος διάρκειας μείγματος σε 20°C2 h
Χρόνος αναχρωματισμού μεταξύ στρώσεων χωρίς τρίψιμοMin 4h Max 5 days
Συσκευασία         code
ΧρώμαΛευκόΓκρι
0,750l –
3,0l –
5,0l –
15 l –
5077
8388
6093
6092
9200
9199
X
1312

Εποξικό ΑστάριLightprimerεγχειρίδιοεφαρμογής:

ROLLER / BRUSH



SPRAY




Μετοχή:

Έχετε ερωτήσεις;
Θα απαντήσουμε το συντομότερο δυνατό

Σχετικά προϊόντα

από Epoxy Lightprimer 5:1


Δείτε επίσης
Άλλα προϊόντα αυτής της κατηγορίας

Οι συχνές ερωτήσεις μας
Απαντήσεις σε συνήθεις ερωτήσεις

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Η προσφορά μας
Εξοικειωθείτε με την προσφορά μας σε υλικά και χρώματα ναυπήγησης σκαφών
Exit
Przewiń na górę