Linguaggio:

Kit la resine polyestere

Home » Prodotti » Resine » Kit la resine polyestere
Zabezpieczenie łodzi
Kit la resine polyestere

DESCRIZIONE DEL PRODOTTO :

Per ottenere una laminazione di massima qualità e adeguata durezza usare una miscelazione 2:1 in peso per la fibra di vetro mate, se si utilizza il tessuto di vetro miscelare in rapporto 1:1 in peso.


INFORMACIONI DI BASE:

Tipolaminazione, acciaio
Postosopra la linea di gallegg
Utilizzolaminatura

sigillatura

uniformare la superfice

incollare e collegare vari elementi alla struttura

Miscelazione a volume10 : 0,4
Miscelazione a peso100 : 2-4
Durata della miscela a 20°C10~15 minutti
Tempo di indurimento a 20°C± 45 minutti

CONFEZIONE :

250 g /  CODICE : 2392

IN CONFEZIONI DA :

APPLICAZIONE:

Manualmente:

INFORMAZIONI TECNICHE :


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Can I add some thinner to antifouling paint?

There is a possibility of thinning antifouling, but we do not recommend this procedure due to the risk of reducing the effectiveness of the paint. If it is necessary to thin the antifouling paint, it is recommended to dilute it to a maximum of 0-5% (by volume).

Do you have to paint the scratched side of the boat?

If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.

La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę