Linguaggio:

WIND & WATER March 2020

Home » Notizie » WIND & WATER March 2020
Sea-Line
WIND & WATER March 2020

WIND & WATER 2020

Traditionally, along with the approaching spring and the upcoming season, we are happy to  invite you to visit the Wind and Water Fair.

This year’s edition will take place on March 12-15 at the new location, i.e. at the Global EXPO Trade Fair and Congress Center at ul. Modlińska 6D in Warsaw.

The meeting will be an opportunity to:

  • show how our products work
  • answer your questions about yachting paints and polishing compounds
  • help in the best solutions selection during boat renovations

Gifts are waiting for the users of our products!

See You in Warsaw!

More about event “Wiatr i Woda 2020”


Condividi:

Vedi anche
Altre discussioni in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Why did the polyurethane topcoat become dull?

Possible causes

  • Too short time for evaporation of the thinner,

How to prevent

  • Maintain the right conditions for complete evaporation of the thinner,

How to remove

  • Mat the surface, degrease and apply the paint according to the rule (right conditions and thinning proportions)
  • Polish surface if needed.

Why does the paint have no adhesion?

Possible causes

  • Wrong surface preparation,
  • Skipping the primer in the system application process,
  • Use of universal thinners or replacements ,
  • Paint incompatibility.

How to prevent

  • Correct surface preparation (grinding, clearing, degreasing),
  • Use primers which improve adhesion of paints,
  • Use thinners which are dedicated to each paints,
  • Use of paints which are compatible to each other.

How to remove

  • Grind, clean and paint again.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę