Linguaggio:

S1 SOFT CUT & GLOSS

Home » Prodotti » Prodotti per lucidatura » S1 SOFT CUT & GLOSS
Zabezpieczenie łodzi
S1 SOFT CUT & GLOSS

S1 PASTA ABRASIVA


NO SILICONE


Sea-Line S1 preffesional Marine polishing paste is a very effective polishing paste. Does not contain silicone.
Recommended for polishing gelcoat surfaces, manufacturing composites, and topcoats. S1 quickly removes scratches and defects after sanding, guaranteeing an ideal surface. Includes high-quality polishing minerals, which ensure a rapid removal of defects. Achieves a high luster by using a one-step process. Working with S1 saves time. Optimal composition. Does not cause excessive heating of the surface and is easy to clean.

For surfaceGelcoat, topcoat, composites, poliuretan paints
FunctionEliminates defects;
removes chalking and surface discoloration; high gloss; protection
Type of damageSanding P1200 and up
ApplicationHand or machine – rotation max 2000
Recommended applicatorLamb wool, hard sponge
Pack0,500kg code 300005578
Colorlight green

 S1 polishing paste – instructional video




Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę