Linguaggio:

YACHT ENAMEL 1K

Home » Prodotti » Smalti e Vernici » YACHT ENAMEL 1K
Producent farb jachtowych
YACHT ENAMEL 1K


TypeLaminates GRP, wood, steel
PlaceAbove waterline
FunctionHigh gloss
Applicationbrush, roll, spray gun
ThinningThinner for 1 – component primer, varnisch, enamel
Theoretical coverage for 1l15-16 m2 for 60 μm WFT/ 40 μm DFT
Number of coats1 ÷ 2
Dry to the touch 20°C:3 h
Dry to rain 20°C:6 h
Fully woterprof10 h
Elapsed time before applying next coat:min. 16 h
Pack0,750l125 ml
Color:code:code:
Phure white 81548166
Crem8152 –
Flame red8158 –
Gentiale blue8161 –
Jet black8163 –

During paint job is recommend to use products from one batch


Condividi:

Avete domande?
Ti risponderemo il prima possibile
 
Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I paint the bottom of the boat with polyurethane paint?

Yes, you can paint the bottom of the boat with polyurethane paint due to its high mechanical strength. We recommend this solution when the boat is not launched for a long time and is not exposed to fouling.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę