Linguaggio:

MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER

Home » Prodotti » Primers » MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER
Kosmetyki do naprawy łodzi oraz jachtów
MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER

EPOXY PRIMER MULTIFUNCTIONAL 2K SPRAY

PRODUCT DISCRIPTION:



BASIC INFORMATION:

SurfacesGRP, laminates, steel, aluminum
AreaAbove and below waterline
FunctionGrounding
Intercoating
Filling
Antiosmotic
Anticorosive
Applicationspray can
Theoretical coverage for 400 ml 1-2 м2
Number of coats2 – 4
Pot life 20°C48 h
Time between layers without sanding5~10 minutes
Color (matt)white
Pack400 ml
Code 38758

APPLICATION INSTRUCTION:

potrzasnij

Before triggering, shake can thoroughly for 2 minutes after agitation balls are heard.

spray 2K - korek

Remove the red pushbutton from the cap.
Turn the can by 180° and fit the pushbutton onto the pin in the base of the can.

spray 2K - wcisnij korek

Turn the can upside down and place on a firm surface.
Press the red pushbutton all the way in with the palm of your hand.

potrzasnijAfter triggering, shake can again thoroughly for 2 minutes after agitation balls are heard.

spray 2K - ustaw dysze

Set the adjustable spray nozzle to the size of the damage and damage pattern.

spray 2K - aplikacja

Spray distance: 10 ~ 20cm.

spray 2K - ilosc warstw

Standard application: approx. 2÷4 spray coats, recommended dry film layer: 80 ~200 μm
NOTICE: For antiosmosis and anticorrosion protection recommended DTF is 240 μm.

spray 2K - czas

Allow a flash-off time of approx. 5-10 minutes between spray coats.

spray 2K - oczysc

After painting, turn the can upside down and spray the valve until empty.

spray 2K - utylizacja

The completely empty spray cans can be disposed of in the recycling waste container.
Cans with hardened material must be disposed of as special waste.

TECHNICAL INFORMATION:


Condividi:

Avete domande?
Ti risponderemo il prima possibile

Prodotti correlati

da MULTIFUNCTIONAL 2K SPRAY EPOXY PRIMER


Vedi anche
Altri prodotti in questa categoria

Le nostre FAQ
Risposte alle domande più frequenti

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
La nostra offerta
Familiarizzate con la nostra offerta di materiali e vernici per la costruzione di barche
Exit
Przewiń na górę