Use biocides safely. Always read the label and product information before use.
Type | aluminum, GRP laminates, wood, steel | |
Place | Below waterline | |
Function | Antifouling paint discourages the growth of barnacles, weed, and | |
Application | brush, roll, spray gun other water life on the submersed hull of the boat. | |
Thinning * | No recomended | |
Theoretical coverage For 1l | 11 m2 for 90 μmWFT/ 50 μm DFT | |
Coats number | 1 – 3 | |
Pot life 20°C | Min 5 h – max 7 days | |
Time between layers without sanding | Min 12 h – max 6 months | |
Pack | 0,750 l | 2,5 l |
Color** | code | code |
white navy / blue black | 5859 8026 8029 | 5861 8027 8030 |
In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.
Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.
Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.
Suitable for salty and regular water. Suitable for sailing and motor boats traveling with a maximum speed 40 knots. For […]
It is very important to use paint thinners, which provide the appropriate parameters of paint – flow, pot life, time […]
Silver Cruise Polishing Antifouling it’s effectively preventing fouling organism: aquatic plants and animals or slime. Ideal paint for professional and […]
THIN FILM Silver Racing is a hard antifouling paint, effectively preventing fouling organism: aquatic plants and animals or slime. Ideal […]
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Il patch e compensare le irregolarità derivanti da danni durante la produzione
Barca protezione superficiale contro l’influenza di azioni distruttive di osmosi e la corrosione in ambienti difficili
Protezione contro l’acqua e contro gli effetti negativi delle radiazioni UV
Proteggere la parte inferiore della barca prima-tedesco ricoperta di alghe e conchiglie. La prevenzione dell’azione di acqua.
Rimozione efficace di ritenzione graffi, di aggiornamento e il colore del mantello gel o lacca
Laminazione, incollaggio e tappatura perdite
Per il riempimento di piccole fessure e ubyt gemme in gelcoat
Una gamma di prodotti utili quando si lavora costruttore di barche