Langue:

A propos de nous

Accueil » A propos de nous » A propos de nous
Zabezpieczenie łodzi
A propos de nous

Sea-Line® est présent sur le marché depuis 2008 et appartient à Troton Company fondée en 1978 dans le nord-ouest de la Pologne. L’équipe se compose d’environ 200 employés. Toutes les usines de l’usine répondent aux exigences des normes ISO 9001 et 14001. La qualité de la gestion est confirmée par les audits TFS. Tous les processus commerciaux tels que la production, les ventes et les paiements sont planifiés et exécutés par le système SAP.

La certification de l’opérateur économique agréé OEA permet une exportation rapide et facile. Brand soutient les distributeurs et les utilisateurs finaux dans plus de 30 pays à travers le monde. La mission de Sea-Line® est de fournir un système complet de peintures et de matériaux de plaisance utiles à chaque étape de la construction de bateaux, des réparations et de l’entretien des bateaux.



Partager:

Voir aussi
Autres threads de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Why the epoxy filler does not harden?

Possible causes

  • Incorrect proportion of base and herdener,
  • Too low temperature of ambient and surface (less than 10ﹾC),
  • Mixing two components from two different manufacturers,

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during the whole hardening process,
  • Use base and hardener from the same manufacturer

How to remove

  • The uncured mass requires complete removal from the surface.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.
Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę