Langue:

SILVER SPEED HARD ANTIFOULING

Accueil » Produits » Peinture antifouling » SILVER SPEED HARD ANTIFOULING
Zabezpieczenie łodzi
SILVER SPEED HARD ANTIFOULING


Use biocides safely. Always read the label and product information before use.

TypeGRP laminates, wood, aluminium, steel
PlaceBelow waterline
Function Antifouling paint discourages the growth
of barnacles, weed, and other water life on the submersed hull of the boat.
Application brush, roll, airless spray gun (only professional)
Thinning *No recommended
Theoretical coverage For 1lby rollerby spray
9 ~ 10 m²3 ~ 5 m²
Coat thickness (WTF)98 μm196 μm
Finish thickness (DTF)50 μm100 μm
Coats number21
Recommended dry layer100 μm
Hardening the surfaces23ºC15ºC
Touch dry30 minutes45 minutes
Immersion:8 hours12 hours
Dry to recoat (overcoating)min. 6 hoursmin. 10 hours
Dry to launch (immersion times)max 6 monthsmax 6 months
Pack0,75 l2,5 l
Color **codecode
red

navy

black

300008382

300008384

300008386

300008381

300008383

300008385

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint.

Antifouling available only in:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why despite the use of antifouing paint the bottom of the boat is overgrown?

Possible causes

  • Too thin layer of antifouling paint,
  • Choosing the wrong antifouling to type of a boat or yacht
  • Thinning of antifouling paint,
  • Incorrect surface preparation before antifouling application.

How to prevent

  • Apply the right layer thickness of paint indicated by manufacturer,
  • Choose antifouling dedicated to type of boat or yacht and suitable for the type of water,
  • Do not thin antifouling because of the risk of reducing effectiveness,
  • Careful surface preparations (grinding, clearing, degreasing),

How to remove

  • Wet grinding, apply new layers of antifouling paint.
  • Use C1 shell and fouling remover.

Can I purchase products directly from you?

We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.

Can I mix polyurethane paints to get a different color?

Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę