Langue:

SILVER CRUISE POLISHING ANTIFOULING

Accueil » Produits » Peinture antifouling » SILVER CRUISE POLISHING ANTIFOULING
Farby dla jachtów
SILVER CRUISE POLISHING ANTIFOULING


Use biocides safely. Always read the label and product information before use.

TypeGRP laminates, wood, steel
PlaceBelow waterline
Function Antifouling paint discourages the growth
of barnacles, weed, and other water life on the submersed hull of the boat.
Application brush, roll

airless spray gun (only professional)

Thinning *No recommended
Theoretical coverage For 1lby rollerby spray
9 ~ 10 m²3 ~ 5 m²
Coat thickness (WTF)98 μm196 μm
Finish thickness (DTF)50 μm100 μm
Coats number21
Recommended dry layer100 μm
Hardening the surfaces23ºC15ºC
Touch dry30 minutes45 minutes
Immersion:4 hours6 hours
Dry to recoat (overcoating)min. 6 hoursmin. 10 hours
Dry to launch (immersion times)max 6 monthsmax 6 months
Pack0,75 l2,5 l
Color **codecode
white

red

blue

navy

black

300008388

300008390

300008392

300008394

300008396

300008387

300008389

300008391

300008393

300008395

* THINNING NOTICE:

In the case of high temperatures and the need to thin the antifouling paint, a maximum dilution of 0-5% (by volume) is recommended.
Dilution and the application method directly affect the thickness of the antifouling paint layer.

Special attention should be paid to obtaining a specific coating thickness (100 μm DTF), which ensures the effective operation of the antifouling paint.

** COLOR NOTICE:

Exposure of a freshly applied antifouling paint to moist air can lead to color change. The discoloration is only superficial and does not affect the effectiveness of the antifouling paint. Due to the content of copper oxide, a small color difference between the parts of the antifouling paint is acceptable.

Antifouling available only in:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais
 
Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why the resin does not harden?

Possible causes

  • Too low temperature of ambitne,
  • Incorrect proportion of base and herdener,
  • Mixing two components from two different manufacturers

How to prevent

  • Apply the correct proportions of components
  • Maintain steady temperature (around 20ﹾC) during whole hardening process,
  • Mix the products thoroughly and bleed the mixture.

How to remove

  • The uncured mass requires complete removal from the surface.

Can I degrease surfaces with acetone?

We do not recommend degreasing the surface with acetone, because acetone evaporates very quickly, which affects the quality of cleaning the painted surface.

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę