Langue:

S08 INDUSTRIAL FORCE CUT – pâte à polir

Accueil » Produits » Système de polissage » S08 INDUSTRIAL FORCE CUT – pâte à polir
Szpachlówki do łodzi
S08 INDUSTRIAL FORCE CUT – pâte à polir

Primarily designed for the companies which produce goods or forms made of gelcoat or an industrial topcoat with a high toughness degree.

DOES NOT CONTAINS SILICONS OR FILLERS


PRODUCT DESCRIPTION:

S08 Industrial Force Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P600 or higher.

Using S08 Industrial Force compound allows for shortening the labour time thanks to a high cutting force.

Specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)

BASIC INFORMATION:

CATEGORY:

SURFACES:

POLISHING:

PACKAGING:

COLOUR:

ADVANTAGES:

Surfaceswhite gelcoat
gelcoat finished products
tool gelcoat
industrial varnishes
Categoryproduction
Functionremoving defects from the surface
Consistencypaste
Surface preparation *mechanical grindingmanual grinding
light colordark colorlight colordark color
gelcoatP600⇒P800⇒P800⇒P1200⇒
tool gelcoat (technical)P800⇒P1200⇒P2000⇒
high hardness surfacesP800⇒P1200⇒P2000⇒

*grinding paper minimal gradation

Method of use:

Surface preparation :

Clean surface destined for polishing.

P600Polish surface with sandpaper of final gradation : minimum P600 →


szlifowanie papierem P800Dark colours or hard surfaces polish with sandpaper of final gradation : minimum P800 →.


Use applicators:

More applicators Sea-Line® / BRAYT

Wool applicators Sea-Line® :

wełna-dwustronna-2Double-sided wool Sea-Line:

(code : 300006614)


wełna-jednostronnaOne side wool Sea-line :

(code: 300006613)


Sponge applicators BRAYT:

gąbka-białaPolishing sponge « PROFI » :

(code :300005933)


gabka-polerska-na-rzep-grubaPolishing sponge whit velcro :

(white – code : 300000384)


Special applicators Sea-Line® :

wełna-pol.-kula-2Polishing wool BALL (80mm) Sea-Line :

(Kod : 300006619)


Polishing :

Clean surface, apply compound onto an element or head (wool or tough sponge)


praca rotacyjna Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture


max obrotySlowly increase speed max. to 1800 RPM working with a little pressure


Further steps :

Clean surface. If after using S08 left any defects:


In order to protect surface, it is recommended to use:

TECHNICAL INFORMATION:


Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de S08 INDUSTRIAL FORCE CUT – pâte à polir


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Why are the streaks formed?

Possible causes

  • Wrong viscosity and spraying technique,
  • Failure to maintain proper evaporation time and thickness of layers,
  • Incorrect spraying pressure,
  • Too low temperature of varnish, surface or space ,
  • Wrong thinner or hardener.

How to prevent

  • Apply the right type of application method indicated by manufacturer,
  • Use working spray guns,
  • Both the object and material must have room temperature of 20ﹾC,
  • Apply correct proportion of base and hardener.

How to remove

  • Grinding and polishing,
  • Grinding and painting,

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I use selfpolishing Sea-Line and HARD Sea-Line antifoulings on aluminium boat?

Sea-Line HARD and Sea-Line self-polishing antifouling are not intended for aluminum surfaces. They include copper oxide, which in contact with aluminum causes galvanic corrosion. Especially on aluminum, we offer ALU-PLUS self-polishing anti-fouling paint, which, in addition to excellent adhesion to aluminum, is also 30% more effective than traditional anti-fouling paints.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę