Cut level = 10
Gloss level = 6
NO SILICONE
S07 Heavy Cut Sea-Line is specialistic polishing paste with a very high cutting force which guarantee quick removal of defects and grinding scratches from a different kind of gelcoat (especially for polishing of industrial gelcoat)
S07 Heavy Cut Sea-Line is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
S07 Heavy Cut Sea-Line removes grinding scratches from gelcoat surface after treatment with sandpaper of gradation P800 or higher. The best results on industrial gelcoat we obtain when we finish grinding with sandpaper P1200 or higher.
Using S07 compound allows for shortening the labour time thanks to a high cutting force and gloss in final stage of work.
TEXTURE :
PACKAGING:
APPLICATION METHODS:
Surfaces | tool gelcoat (technical), gelcoat, | |||
Function | removing defects from the surface gloss restoring | |||
Consistency | paste | |||
Surface preparation * | mechanical grinding | manual grinding | ||
light color | dark color | light color | dark color | |
gelcoat | P800⇒ | P1200⇒ | P800⇒ | P1200⇒ |
tool gelcoat (technical) | P1200⇒ | P1500⇒ | P2000⇒ | |
high hardness surfaces | P1200⇒ | P1500⇒ | P2000⇒ |
Surface preparation :
Clean surface destined for polishing.
Polish surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
(white – code : 300000384)
Clean surface, apply compound onto an element or head (wool or tough sponge)
Apply compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and compound changes its texture
Slowly increase speed max. to 1800 RPM working with a little pressure
Further steps :
Clean surface. If after using S07 left any defects:
LAINE DE POLISSAGE : LAINE DE POLISSAGE SEA-LINE® (DOUBLE FACE) LAINE DE POLISSAGE SEA-LINE® POLISHING CONE SEA-LINE® LAINE D’AGNEAU TYPE „D” (JAUNE) […]
S0 PÂTE À POLIR – FAST CUT & MEDIUM GLOSS Niveau de Cut = 8 Brilance = 6 NO SILICONE TEXTURE : […]
S3 FINISH CLEANER – SHINE CONTROL is a product for all types of paints,varnishes – including HS, 2K, nitro, synthetic […]
Désolé, cet article est seulement disponible en Polonais.
If the scratches are not deep, then we can renew the scratched side by polishing with Sea-Line polishing pastes. Above the waterline, when the scratches are not deep, the surface can be repaired with a DRY FAST gel coat filler. Deep scratches should be filled with epoxy filler (selected depending on the requirements of the scratched surface), painted with a primer and then painted with topcoat.
Yes, you can mix Sea-Line polyurethane paints. The only difference are the pigments of polyurethane paints that determine the color of the paint. But remember to keep the right proportions of base, hardener and thinner.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
La protection contre l’eau et contre l’influence néfaste des rayons UV
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Préparations spéciales pour le nettoyage et la remise en vigueur
Laminage, collage et de remplissage des fissures dans gelcoat
Beaucoup de produits utiles pour les travaux de construction d’un bateau