Cut level = 9
Gloss level = 8
NO SILICONE
TEXTURE :
PACKAGING:
APPLICATION METHODS:
Sea-Line® S05 polishing compound is a one-stage compound with a high cutting force which guarantees quick removal of defects and grinding scratches from a surface after treatment with sandpaper of gradation from P800.
Sea-Line® S05 polishing compound is primarily designed for the companies which produce goods in which the outer layer is gelcoat or forms made from utility gelcoat and an industrial topcoat with a high toughness degree.
Using S05 polishing compound allows for shortening the labour time thanks to a high cutting force while obtaining appropriate gloss on the surface without the necessity of using other kinds of polishing compounds.
Przygotowanie powierzchni :
Clean the surface destined for polishing. If removing defects is necessary, polish the surface with sandpaper of the following gradation preliminary polishing: <P500
Polish the surface with sandpaper of final gradation : P800 →
Dark colours or hard surfaces polish the surface with sandpaper of final gradation : P1200 →.
More applicators Sea-Line® / BRAYT
(code: 300006613)
Polishing sponge whit velcro :
Clean the surface, apply the compound onto an element or head (wool or tough sponge)
Apply the compound at minimum rotations on the whole surface that is being polished (800-1000 rotations/min) polishing until it changes colour and the compound changes its texture
Slowly increase the speed max. to 1800 RPM working with a little pressure
Clean the surface. In order to protect the surface, it is recommended to use:
Sea-Line® S1 Marine est un agent de polissage très efficace qui ne contient pas de silicone. CUT LEVEL = 6 […]
Désolé, cet article est seulement disponible en Polonais.
S1 PREMIUM POLISHING COMPOUND – ONE STEP, CUT & HIGH GLOSS Cut level = 8 Gloss level = 9 NO […]
LAINE DE POLISSAGE : LAINE DE POLISSAGE SEA-LINE® (DOUBLE FACE) LAINE DE POLISSAGE SEA-LINE® POLISHING CONE SEA-LINE® LAINE D’AGNEAU TYPE „D” (JAUNE) […]
Do not add more hardener, because after the base has cured, the remaining hardener will react with subsequent layers, which will be applied to the surface and cause defects. For the product to work properly, please follow the proportions given by the manufacturer.
We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.
We do not sell retail. Our products can be found in many stores in Poland and abroad. Our distributors run stationary and online stores. The full list of distributors and contacts can be found on our website at the following link click here.
Le produit destiné au remplissage des lacunes et à la liquidation des inégalités résultant des dommages ou des inégalités qui […]
La protection de la surface du bateau contre l’influence destructrice de l’osmose et de la corrosion dans des conditions difficiles
La protection contre l’eau et contre l’influence néfaste des rayons UV
La protection du fond du bateau contre l’encrassement par les algues et contre les coquillages. La protection contre l’eau
Une élimination efficace des fissures, le rafraîchissement de la couleur et du brillant du gel coat ou du vernis
Préparations spéciales pour le nettoyage et la remise en vigueur
Laminage, collage et de remplissage des fissures dans gelcoat
Beaucoup de produits utiles pour les travaux de construction d’un bateau