Langue:

Primaire époxydique anticorrosif 4:1

Accueil » Produits » Primaires » Primaire époxydique anticorrosif 4:1
Producent farb jachtowych
Primaire époxydique anticorrosif 4:1


Type de bateaul’acier,
l’aluminium
EndroitAu dessous et au dessus de la ligne de flottaison
FunctionDe fond
Entre couches
Remplissant
Anticorrosif
ApplicationPinceau, rouleau, projection
DilutionOui – dilutif

pour les systèmes époxydiques

Rendement théorétique pour 1l11-12 m2 pour 85 μm WFT /60 μm DFT
Nombre de couches2 – 3
Temps de travail  20°C2 h
Temps entre les couches Sans la nécessité de ponçageMin 4h
Max 5 jours
Couleuroxyde rouge
Emballagecodes
0,75l –
7,5l –
5076
5145

Partager:

Avez-vous des questions?
Nous vous répondrons dans les plus brefs délais

Produits connexes

de Primaire époxydique anticorrosif 4:1


Voir aussi
Autres produits de cette catégorie

Notre FAQ
Réponses aux questions fréquemment posées

Is it necessary to always sand the surface between application of two different products?

We recommend to always sand the surface between applying two different products to ensure uniform surface roughness and adhesion of subsequent layers. The sanded surface should also be cleaned and degreased.

Why the paint does not have the right flow?

Possible causes

  • No thinning, wrong thinner or wrong amount of thinner
  • Wrong type of roll or brush (wrong bristle lenght)
  • Applying too much or too Little paint,
  • During painting process temperature was too high or the air was too dry,
  • Incorrect preparation of too porous surface,
  • Incorrect proportion of thinner.

How to prevent

  • Use a brush/Toller suited to the type of surface or paint,
  • Use thinner which is dedicated to the type of application and paints
  • Use thinning proportions which was indicated by manufacturer,
  • Paint in right atmosphere conditions indicated by manufacturer,

How to remove

  • Grind, clean and paint again.

Can I paint a boat, previously painted with 1 component paint, with polyurethane?

No, polyurethane is a 2-component paint (base + hardener) and after applying 2-component paint to 1-component paint, the proper adhesion of the paint to the surface will not be maintained, the paint will begin to wrinkle and surface defects will appear.

Notre offre
Familiarisez-vous avec notre offre de matériaux et de peintures pour la construction de bateaux
Exit
Przewiń na górę